yw@njsspeek.com

PRODUCTS

  • PEEK

  • PI

  • PPS

  • Oil drilling

peek
01

PEEK plastic sleeve bushings

PEEK sleeve, used in textile machinery chain, has high temperature resistance, wear resistance, corrosion resistance, self-lubrication and other characteristics and featured with light weight, low noise and the like by comparing with metal materials.
02

PEEK Rod Other Continuous Extrusion Profiles

PEEK rods with a diameter of 1-200mm can be extruded. The length is generally 1000mm or 2000mm. It can also be cut according to customer requirements.
03

Continuous Extrusion PEEK Sheets

Which specializes in the extrusion molding and secondary processing of products of PEEK, PPS, PPSU, PEI and other special engineering plastic.
PI
01

PI Sheets

Its comprehensive performance is unmatched by other special engineering plastics and regarded as expert of the problem. It is widely used in aerospace, aerospace, mechanical, electrical, atomic, microelectronics, thin film, LC display and other high-tech fields.

02

PI Rod Plate

After years of market cultivation, polyimide is used as sealing material, structural material, heat insulating material, friction material, high temperature coating.

03

PI insulation gasket

Nanjing Yuwei New Material Co.,Ltd manufactures ultra-high temperature resistant special engineering plastics - polyimide PI profiles (rods / plates / tubes), inject molding, machining of various PI parts.
PPS
01

Customized PPS Sheets

Polyphenylene sulfide (PPS) has excellent comprehensive properties in chemical and high temperature environments, including wear resistance, high load capacity and dimensional stability.

02

Customized PPS Rods

Polyphenylene sulfide (PPS) has excellent comprehensive properties in chemical and high temperature environments, including wear resistance, high load capacity and dimensional stability.

03

Heat Resistance PPS Machined Parts

Polyphenylene sulfide (PPS) has excellent comprehensive properties in chemical and high temperature environments, including wear resistance, high load capacity and dimensional stability.

Oil drilling
01

Soluble (degradable) fracturing balls

It can be dissolved in water containing electrolyte and not in oil medium, in which the dissolution rate is related to the temperature used and the structural characteristics of the application. The specific gravity is 1.5g/cm3-1.8g/cm3 and the maximum operating temperature is 200℃ and it is suitable for water and gas wells.

02

Drillable special composite bridge plug

With the selection of special plastic composite materials and special composite formula and in combination with metal material bridge plug, the drillable special composite bridge plug has been tested and developed successfully, which has been supplied to major domestic oil and gas field companies.

03

Soluble (degradable) metal alloy rods

According to the customers' needs in the petroleum industry, Nanjing Shousu has developed series of soluble (degradable) metal alloy rods for different environments, which are suitable for matching up with the tools for the production of soluble (degradable) fracturing balls, soluble (degradable) bridge plugs, soluble (degradable) sliding sleeves, ball sockets and etc.

Hot products

a

PEEK finish machining products

PEEK has the heat resistance and chemical stability of thermosetting plastics and the molding processability of thermoplastics. The long-term use temperature of PEEK is about 260-280℃, the short-term use temperature can reach 330℃, and the high pressure resistance can reach 30MPa. 

P E E K
b

PEEK rod&plate

PEEK rod&plate is a semi-finished profile extruded from PEEK raw materials. It has the characteristics of high temperature resistance, high wear resistance, high tensile strength, and good flame retardancy. 

P E E K
c

Peek products
d

Peek products

Quality Policy

01

Technical

15 years of experience in production and R & D of PEEK, PI, PPS and other profiles and parts. Advanced and mature peek profile extrusion production line. Have the ability of injection molding and machining peek parts of various specifications.
02

Equipment

Continuous extrusion production line, large injection molding machine, molding machine, five axis machining center, high precision CNC lathe and other processing equipment. 3D coordinate projector, friction and wear testing machine, microcomputer controlled electronic universal testing ma chine, surface hardness tester, etc.
03

Product

Extruding peek bar, plate, tube and other profiles with com prehensive specifications and large stock. All kinds of PEEK filaments and capillaries are extruded. Peek profile extrusion can be customized according to cus tomer requirements.
04

Quality

Tick comprehensively analyze the material properties and constantly improve the formulation design and process. Strictly control the enterprise standards and quality inspection process to ensure the factory quality of each product. It has a good cooperative relationship with the raw material suppliers such as Victrex, vespl, German engineering plastics and other raw materials suppliers in the UK, with stable raw materials sources.
+MORE
VIDEO
since 2005-2020

About Us

Nanjing Yuwei New Material Co., Ltd. specializes in the extrusion molding of special engineering plastic profiles such as PEEK, PPS, PPSU, PEI and the secondary processing of products, and it provides R&D, design and production integrated solutions to special engineering plastic profiles and parts for different industries.

+MORE

News

+MORE

QR Code

Links
Product
PEEK
PI
PPS
Oil Drilling
About Us
Company
Honor
Contact Us
Feedback
Quality Policy
Technical
Equipment
Product
Quality
News
News
Knowledge
Copyright © Nanjing Yuwei New Material Co., Ltd. All Rights Reserved.